SUPERCOMPRESSED CORK COVER KIT for 7.5 - 12.5 - 25 - 30 - 37.5sqm - Adhesive and spatula included
The kit includes the cork, the adhesive and the spatula, in the versions
ProntoKit-03-24s for 25sqm - 3mm cork in panels
ProntoKit-06-12.5s for 12.5sqm - 6mm cork in panels
ProntoKit-06-37.5s for 37.5sqm - 6mm cork in panels
ProntoKit-10-7.5s for 7.5mq - 10mm cork panels
ProntoKit-10-30s for 30 sqm - 10mm cork panels
ProntoKit - cork and spatula adhesive!
THERMAL COVERINGS WITH CORK IN PANELS
The kit includes the cork, the adhesive and the spatula to spread the adhesive.
The kit has been designed to achieve the thermal coating with maximum ease of installation: in fact, the small size of the panels facilitates installation, especially for thicknesses of 6 and 10mm
ITEMS CONTAINED IN THE KIT:
1 - COVERING CORK IN PANELS 50x100cm
Panel cork for thermal and acoustic coating to be applied to the wall.
Due to its excellent technical and aesthetic qualities, it is also applied as a wall covering and left exposed, or finished with Bioart-Termic Cork Paint.
Natural cork for cladding is characterized by:
fine ventilated granulometry,
free from impurities
of high flexibility
of high density.
high insulation value for the thermal and acoustic coat.
With the coating cork contained in the kit you can make excellent coverings on cold and wet walls, solve the problem of condensation and mold moisture on the walls.
2 - ADHESIVE FOR CORK WITH SPATULA
Glue for heavy wall coverings in cork (also suitable for other materials such as paper, fabrics, ceramics, pvc, carpets, etc.)
3 - SPATULA WITH TOOTH SAW
Spatula with saw tooth of 200mm width.
The use of a good spatula in wall coverings facilitates the realization of the thermal coating:
the size and the manageability of the spatula allow a quick glue spreading.
the correct toothing of 1mm distributes the right amount of adhesive.
Apply the right amount of glue to the wall using the spatula supplied.
Apply the covering panel and carefully press the covering and expel the air bubbles from the edges.
Immediately clean any burrs with a damp and clean sponge.
The substrates must be healthy, clean and dry before applying the cork thermal coating.