roof and ceiling insulation natural cork thermal insulation system for...
Adhesive and skim coat: applying and coating cork panels applying and...
Natural cork in roll for thermal and acoustic insulation against...
Self-adhesive plaster based on natural hydraulic lime for fastening...
To solve the problem of condensation and mold on cold and damp walls...
Cork sheets dim.100x50cm.
Granulated cork available in grain sizes: 3/14mm 3/8mm 0,4/3mm
Clinging primer for thepreparation of the funds to be treated with:...
EXTRAFINE super-compressed cork with a grain size between 0.5 and 1 mm,...
Pittura naturale traspirante colorabile aggiungendo i colori...
Self-adhesive tape to seal the joints between the super-compressed cork...
Pack of 125gr and 250grColors based on colored earths and ferric oxides,...
Red cocciopesto powder conf. 25 kg Granulometries 0-1mm and 0-3mm
Yellow cocciopesto powder - conf. 25 kg.
1 Kg - 5 Kg - 25 Kg packsAdded in the appropriate proportions, they are...
Packs of 1 and 5 L Removes mold and fungi from the wall and wood. To be...
Fixing mortar NHL2 natural hydraulic lime based, with a smooth final...
Size 1 - 5 L.Nourishing detergent for floors. In-depth cleaning of...
100 pcs pack Apply 6 pieces per square meter (+ 1 piece for the relative...
Ancient recipe of plaster in lime and cocciopesto packaged in a bag with...
UNIVERSAL ECOLOGICAL GLUE FOR COATINGSSpecial adhesive for bonding wall...
Choice of 2 and 3mm thicknessesNatural cork in rolls with selected and...
Premixed for screeds composed...
Viewed products
Washable water-based paint for...
New product
Washable water-based paint for interiors with vegetable resins.
Washable satin, real silk effect. Product of superior quality for beauty, yield, coverage, white point and spreadability. Use with a brush enhances the quality of the product. Size 0.75 - 3.5 - 14 liters.
6 Item Items
Warning: Last items in stock!
Availability date:
Washable water-based paint for interiors with vegetable resins.
Washable satin, real silk effect. Product of superior quality for beauty, yield, coverage, white point and spreadability. The use with brush enhances the quality of the product. Transpiring, protective, antistatic (does not attract dust), water repellent.
• For painting new walls or for repainting.
• Applicable on all supports properly prepared and well adherent to the bottom.
• 8/12 hours for the next hand. Data referred to the temperature of 20 ̊C and humidity rel. 60%.
• Temperature and humidity different from those indicated may change the drying times.
• The resins and natural oils by their nature need 3/5 weeks to dry and harden completely, you can smell a characteristic, not dangerous, in the period following the application of the product.
• New, lime, gypsum or powdered substrates should be prepared with Fissante M10 Solas.
• Apply two coats by roller, brush or spray (maximum dilution).
• If you use neutral water-based paint (M11F100), when the wall to be painted is already colored, first apply a light gray coat if the underlying color is very intense.
• If you use neutral water-based paint (M11F100), when the wall to be repainted has been treated with stucco or partial shaving, first apply a coat of white water-based paint to even out the surface.
• Always paint from corner to corner without interrupting.
• Do not apply at temperatures below 8 ̊C.
Opaque, opaque. White or colored.
12-14 m2 / L per coat. The yield is influenced by the type of support and environmental conditions.
• M13F000 white, add 20% -30% of water according to the characteristics of the base:
- from 0.7L to 1.05L for the 3.5L package
- from 2.8L to 4.2L for the 14L package
• Dilutions higher than indicated will compromise the strength and opacity of the finish.