roof and ceiling insulation natural cork thermal insulation system for...
Adhesive and skim coat: applying and coating cork panels applying and...
Natural cork in roll for thermal and acoustic insulation against...
Self-adhesive plaster based on natural hydraulic lime for fastening...
To solve the problem of condensation and mold on cold and damp walls...
Cork sheets dim.100x50cm.
Granulated cork available in grain sizes: 3/14mm 3/8mm 0,4/3mm
Clinging primer for thepreparation of the funds to be treated with:...
EXTRAFINE super-compressed cork with a grain size between 0.5 and 1 mm,...
Pittura naturale traspirante colorabile aggiungendo i colori...
Self-adhesive tape to seal the joints between the super-compressed cork...
Pack of 125gr and 250grColors based on colored earths and ferric oxides,...
Red cocciopesto powder conf. 25 kg Granulometries 0-1mm and 0-3mm
Yellow cocciopesto powder - conf. 25 kg.
1 Kg - 5 Kg - 25 Kg packsAdded in the appropriate proportions, they are...
Packs of 1 and 5 L Removes mold and fungi from the wall and wood. To be...
Fixing mortar NHL2 natural hydraulic lime based, with a smooth final...
Size 1 - 5 L.Nourishing detergent for floors. In-depth cleaning of...
100 pcs pack Apply 6 pieces per square meter (+ 1 piece for the relative...
Ancient recipe of plaster in lime and cocciopesto packaged in a bag with...
UNIVERSAL ECOLOGICAL GLUE FOR COATINGSSpecial adhesive for bonding wall...
Choice of 2 and 3mm thicknessesNatural cork in rolls with selected and...
Premixed for screeds composed...
Viewed products
Size 0.75 - 2.5 - 5 - 20 liters....
New product
Size 0.75 - 2.5 - 5 - 20 liters. Terracotta oil finish.
40 Item Items
Warning: Last items in stock!
Availability date:
Finishing treatment based on natural standoli. Guarantees protection and resistance to freezing in outdoor areas.
Made with Tung-Durga stand oil, this oil combines breathability with excellent scratch and stain resistance.
Spreader or vegetable brush. Clean with a cloth or vegetable brush.
Oil finish for terracotta and stone floors. Protects from stains, for surfaces subject to high stress.
Mix well and apply the product without leaving accumulation areas.
A few minutes after application (30-40 min.) Remove the excess using an absorbent cloth, using a monobrush. Replace the cloth with a dry one when it becomes too wet.
If necessary apply a second coat after 8-9 hours.
For rough floors, use a soft vegetable brush to replace the absorbent cloth.
Paint
20-24 sqm / l