Cork and Coatings Glue for spatula use - Pack of 5 and 20 kg
UNIVERSAL ECOLOGICAL GLUE FOR COATINGS
Special adhesive for bonding wall coverings such as cork in sheets or squares, wall coverings in PVC, ceramic (even on old tiles), floor and wall carpeting.
Packs of 5 and 20 kg
ADHESIVE FOR CORK WITH SPATULA
Special glue for bonding wall coverings such as cork in sheets or squares, wall coverings in PVC, ceramic (even on old tiles), floor and wall carpeting.
Before applying cork glue on walls and ceilings, make sure the plaster is well anchored. Substrates with old ceramics must be hammered and sanded to facilitate adhesion; in case of steep slopes, proceed in advance with a stucco shaving. Then spread the cork glue with a fine trowel, no more than 1 m² at a time, apply the coating on the fresh layer of glue, carefully press the surface of the coating to ensure a good wetting of the back and eliminate any air bubbles.
The substrates must be healthy, clean and dry.
Open time: 15 minutes
Yield: 500-700 g / m2
Temperatures: work with at least + 10 ° C
Tools: trowel with fine teeth 1 mm
Final film: tough and resistant to moisture
- Keep away from frost
- Store in temperate environments
- Shelf life: 1 year from the date of production
- Cleaning: with warm water
- Do not dilute
- Risk class: it is not a dangerous product
- Packaging: 5 Kg - 20 Kg.
You might also like
CORK sheets thickness 3 - 6 - 10 mm - thermal and acoustic insulation
CORK FOR THERMAL AND ACOUSTIC INSULATION IN ROLLS height 50 cm - length roll 8 m 2-3 mm...
Customers who bought this product also bought:
Coat gusset 100 pcs th. insulator 6-14cm
SAND bagged wet - grain size 0 / 2mm - 25 kg bag
CORK THERMAL PAINTING / PLASTER - Natural mold / condensate preparation - Pack. for 10...
Cork panels 1 to 10 cm thick -...
BIOART ADHESIVE / SKIMMING FOR CORK...
Bioart- THERMAL COATING FINE STICKER...
Compressed roll cork - 2-3-6-10 mm -...
Last blog articles
No newsSee all