roof and ceiling insulation natural cork thermal insulation system for...
Adhesive and skim coat: applying and coating cork panels applying and...
Natural fine grained cork rolls
To solve the problem of condensation and mold on cold and damp walls...
Self-adhesive plaster based on natural hydraulic lime for fastening...
Cork sheets dim.100x50cm.
125 lt bags Avaiable in: 3/14mm 3/8mm 0,4/3mm
Clinging primer for thepreparation of the funds to be treated with:...
extrafine grained compressed cork rolls.
Fixing mortar NHL2 natural hydraulic lime based, with a smooth final...
Fine grained natural cork
Pittura naturale traspirante colorabile aggiungendo i colori...
Packs of 1 and 5 L Removes mold and fungi from the wall and wood. To be...
Size of 125 gr/ 250 gr ecological colourings for wall painting
25 kg bag
Ancient recipe of plaster in lime and cocciopesto packaged in a bag with...
100 pcs pack Apply 6 pieces per square meter (+ 1 piece for the relative...
Conf. da 5 - 20 kg
Red cocciopesto powder conf. 25 kg Granulometries 0-1mm and 0-3mm
Conf. 50/200 caps selected for cork brand and color decorations
1 Kg - 5 Kg - 25 Kg packsAdded in the appropriate proportions, they are...
Yellow cocciopesto powder - conf. 25 kg.
1-3-10 kg bags
1-3-10 kg bags
8 Item Items
Warning: Last items in stock!
Walls and wood impregnating salts for long-lasting protective and preventive action.
Suitable for walls treatment against fungus and mold problems.
Make the wood unwelcome to worms and insects.
-for brush use or roller, mix the 1kg of boron salts with 7 liters of warm water.
- for spray use, the dilution changes according to the ambient temperature: at 10° mix 1 kg of boron salts with 10 liters of water; at 20° mix 1 kg of boron salts with 7 liters of water; at 30° mix 1 kg of boron salts with 5 liters of water.
1- WALL - for walls disinfection before re-painting: wash several times the molded area with boron salt solution. Then add to the fixative and the water-based paints.
2- WOOD- For infested wooden surfaces with fungi and molds: apply an abundant solution of boron salts by brush, roller or spray and wait 12 hours before the eventual second coat.